[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OSS Technical Support Request by robert




 > From: Hannu Savolainen <http://www.opensound.com/~hannu>
 > Date: Wed, 3 May 2000 11:06:58 +0300 (EEST)
 >
 > Hi,
 > 
 > Don't use the exclude IRQs function. Instead use the Manual configuration
 > screen and try the other supported interrupts for the device.

 I assume by supported interrupts you mean an available IRQ since this
board is play-n-play and interrupts are preassigned.

  In any case, I'm still unable to get sound working.  As before, I
included soundon.log and soundconf.log  below.

 > Best regards,
 > 
 > Hannu
 > -----
 > Hannu Savolainen (http://www.opensound.com/~hannu)
 > http://www.opensound.com (Open Sound System (OSS))
 > http://www.compusonic.fi (Finnish OSS pages)

soundon.log

Wed May 10 21:07:48 EDT 2000
Linux  2.0.36 #2 Sun Feb 21 15:55:27 EST 1999 i586 unknown
This version (3.9.3b-991216) is compiled for Linux-2.0.36-UP
Kernel version: Linux  2.0.36 #2 Sun Feb 21 15:55:27 EST 1999 i586 unknown
Modutils version: 2.1.121
=== Running /usr/local/bin/soundon ===
Install directory: /usr/local/lib/oss
cat: /usr/local/lib/oss/sndshield.ver: No such file or directory

sndshield loaded OK
soundbase loaded OK
midi loaded OK
ad1848 loaded OK
opl3 loaded OK
uart401 loaded OK
pnp loaded OK
==== About to start the driver using the following config ===
/SECUREAUDIO OFF
/IRQEXCLUDE 3 4 7
/DMAEXCLUDE 2
-CSC4236 #Generic Crystal CS4236 (type-1)
/PNPDEV CSC0000 P530 P388 P# I12 D1 D0
/PNPDEV CSC0003 P330 I9
/PNPDEV CSC0010 P534
AD1848 OPNP P530 I12 D1 d0
OPL OPNP P388
UART401 OPNP P330 I9
PNP
++ pnpres.dat ++
Resources for PnP card #0

0000: 0e 63 42 36 ff ff ff ff a9 0a 10 05 82 0e 00 43 
0010: 72 79 73 74 61 6c 20 43 6f 64 65 63 00 15 0e 63 
0020: 00 00 00 82 07 00 57 53 53 2f 53 42 00 31 00 2a 
0030: 02 28 2a 09 28 22 20 00 47 01 34 05 34 05 04 04 
0040: 47 01 88 03 88 03 08 04 47 01 20 02 20 02 20 10 
0050: 31 01 2a 0a 28 2a 0b 28 22 a0 9a 47 01 34 05 fc 
0060: 0f 04 04 47 01 88 03 88 03 08 04 47 01 20 02 60 
0070: 02 20 10 31 02 2a 0b 28 22 a0 9a 47 01 34 05 fc 
0080: 0f 04 04 47 01 88 03 f8 03 08 04 47 01 20 02 00 
0090: 03 20 10 38 15 0e 63 00 01 00 82 05 00 47 41 4d 
00a0: 45 00 31 00 47 01 00 02 00 02 08 08 31 01 47 01 
00b0: 08 02 08 02 08 08 38 15 0e 63 00 10 00 82 05 00 
00c0: 43 54 52 4c 00 47 01 20 01 f8 0f 08 08 15 0e 63 
00d0: 00 03 00 82 04 00 4d 50 55 00 31 00 22 00 02 47 
00e0: 01 30 03 30 03 08 02 31 01 22 00 9a 47 01 30 03 
00f0: 60 03 08 02 31 02 47 01 30 03 e0 03 08 02 38 79 
0100: 9a 

++++
/usr/local/lib/oss/sndconf: error in loading shared libraries
: undefined symbol: __bzero
OSS/Linux 3.9.3b (C) 4Front Technologies 1996-1999

License serial number: N02663758
Options: 
This copy of OSS is licensed to robert

Build: 2.0.36-UP

Card config: 
Generic PnP support
OPL-2/OPL-3 FM at 0x388
SoundPort at 0x530 irq 12 drq 1,0
MPU-401 (UART) at 0x330 irq 9

Audio devices:
0: Crystal Codec (CS4236) (DUPLEX)
1: Shadow of audio device #0 (DUPLEX)

Synth devices:
0: Yamaha OPL-3

Midi devices:
0: Crystal Codec

Timers:
0: System clock

Mixers:
0: Crystal Codec (CS4236)


++++ dmesg printout follows ++++
Memory: sized by int13 088h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fab50
pcibios_init : BIOS32 Service Directory entry at 0xfafd0
pcibios_init : PCI BIOS revision 2.10 entry at 0xfb000
Probing PCI hardware.
Calibrating delay loop.. ok - 199.48 BogoMIPS
Memory: 62532k/65536k available (1136k kernel code, 384k reserved, 1484k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.36 (root@gondor) (gcc version 2.7.2.3) #2 Sun Feb 21 15:55:27 EST 1999
Starting kswapd v 1.4.2.2 
Real Time Clock Driver v1.09
tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $
tpqic02: DMA buffers: 20 blocks, at address 0x282600 (0x28254c)
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
    ide0: BM-DMA at 0xf000-0xf007
    ide1: BM-DMA at 0xf008-0xf00f
hda: WDC AC14300R, 4112MB w/512kB Cache, CHS=524/255/63
hdb: Maxtor 71670 AP, 1596MB w/128kB Cache, CHS=811/64/63, DMA
hdd: V004H0DT B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
Failed initialization of WD-7000 SCSI card!
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 hda3 hda4
 hdb: hdb1 hdb2 hdb3 hdb4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
CSLIP: code copyright 1989 Regents of the University of Ca
PPP: version 2.2.0 (dynamic channel allocation)
PPP Dynamic channel allocation code copyright 1995 Caldera, Inc.
PPP line discipline registered.
smc-ultra.c: Presently autoprobing (not recommended) for a single card.
smc-ultra.c:v2.02 2/3/98 Donald Becker (http://www.cesdis.gsfc.nasa.gov/~becker)
eth0: SMC Ultra at 0x300, 00 00 C0 56 9B 7B, IRQ 10 memory 0xcc000-0xcffff.
ftape-2.08 960314
 (c) 1993-1995 Bas Laarhoven (http://www.vimec.nl/~bas)
 (c) 1995-1996 Kai Harrekilde-Petersen (http://www.dolphinics.no/~khp)
 (c) 1996-1997 Claus Heine (http://www.momo.math.rwth-aachen.de/~claus)
 QIC-117 driver for QIC-40/80/3010/3020 tape drives
 Compiled for kernel version 2.0.36 with versioned symbols
UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos)
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
tty02 at 0x03e8 (irq = 4) is a 16550A
SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256).
SLIP linefill/keepalive option.
registered device ppp0
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
end_request: I/O error, dev 02:00, sector 0
VFS: Disk change detected on device 02:00
ad1848: Interrupt test failed (IRQ5)
ad1848: Interrupt test failed (IRQ5)
ad1848: Interrupt test failed (IRQ5)
ad1848: Interrupt test failed (IRQ12)
++++++++
PCI devices found:
  Bus  0, device   8, function  0:
    VGA compatible controller: Cirrus Logic GD 5430 (rev 71).
      Medium devsel.  IRQ 255.  
      Prefetchable 32 bit memory at 0xe0000000.
  Bus  0, device   7, function  3:
    Bridge: Intel 82371AB PIIX4 ACPI (rev 1).
      Medium devsel.  Fast back-to-back capable.  
  Bus  0, device   7, function  2:
    USB Controller: Intel 82371AB PIIX4 USB (rev 1).
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master Capable.  Latency=32.  
      I/O at 0x6400.
  Bus  0, device   7, function  1:
    IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  Latency=32.  
      I/O at 0xf000.
  Bus  0, device   7, function  0:
    ISA bridge: Intel 82371AB PIIX4 ISA (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  No bursts.  
  Bus  0, device   0, function  0:
    Host bridge: Intel 82439TX (rev 1).
      Medium devsel.  Master Capable.  Latency=32.  
processor	: 0
cpu		: 586
model		: AMD-K5(tm) Processor
vendor_id	: AuthenticAMD
stepping	: 4
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid		: yes
wp		: yes
flags		: fpu vme de pse tsc msr mce cx8 pge
bogomips	: 199.48
++++
 0:    9985099   timer
 1:       3545   keyboard
 2:          0   cascade
 4:       9672 + serial
 8:          3 + rtc
 9:          3   MPU-401 UART
10:      44951   SMC Ultra
12:          0   Crystal Codec
13:          1   math error
14:    2040317 + ide0
15:          0 + ide1

-------------------------------------------------------------------------------

soundconf.log

Wed May 10 21:06:15 EDT 2000
Linux  2.0.36 #2 Sun Feb 21 15:55:27 EST 1999 i586 unknown
This version (3.9.3b-991216) is compiled for Linux-2.0.36-UP
Kernel version: Linux  2.0.36 #2 Sun Feb 21 15:55:27 EST 1999 i586 unknown
Modutils version: 2.1.121
=== Running /usr/local/bin/soundconf ===
Install directory: /usr/local/lib/oss
cat: /usr/local/lib/oss/sndshield.ver: No such file or directory


*** This soundon.log is for soundconf ***

sndshield loaded OK
soundbase loaded OK
audiobuf loaded OK
midi loaded OK
opl3 loaded OK
uart401 loaded OK
sb loaded OK
mpu401 loaded OK
ad1848 loaded OK
ad1816 loaded OK
gus loaded OK
mad16 loaded OK
maui loaded OK
trxpro loaded OK
opl3sa loaded OK
cs4232 loaded OK
Optional waveloop module not installed
pas16 loaded OK
wartist loaded OK
pss loaded OK
sscape loaded OK
msnd loaded OK
emu8k loaded OK
za2 loaded OK
softsynth loaded OK
pnp loaded OK
studio loaded OK
audiopci loaded OK
vibes loaded OK
ac97 loaded OK
a3dvortex loaded OK
maestro loaded OK
apci97 loaded OK
digi32 loaded OK
sblive loaded OK
solo loaded OK
dream loaded OK
vivosynth loaded OK
ymf724 loaded OK
wave4d loaded OK
cs4280 loaded OK
als300 loaded OK
als4000 loaded OK
cmpci loaded OK
neomagic loaded OK
intelpci loaded OK
/usr/local/lib/oss/sndconf: error in loading shared libraries
: undefined symbol: __bzero
+++ devices.cfg +++
/SECUREAUDIO OFF
/IRQEXCLUDE 3 4 7
/DMAEXCLUDE 2
-CSC4236 #Generic Crystal CS4236 (type-1)
/PNPDEV CSC0000 P530 P388 P# I12 D1 D0
/PNPDEV CSC0003 P330 I9
/PNPDEV CSC0010 P534
AD1848 OPNP P530 I12 D1 d0
OPL OPNP P388
UART401 OPNP P330 I9
PNP
+++ pnpres.dat +++
Resources for PnP card #0

0000: 0e 63 42 36 ff ff ff ff a9 0a 10 05 82 0e 00 43 
0010: 72 79 73 74 61 6c 20 43 6f 64 65 63 00 15 0e 63 
0020: 00 00 00 82 07 00 57 53 53 2f 53 42 00 31 00 2a 
0030: 02 28 2a 09 28 22 20 00 47 01 34 05 34 05 04 04 
0040: 47 01 88 03 88 03 08 04 47 01 20 02 20 02 20 10 
0050: 31 01 2a 0a 28 2a 0b 28 22 a0 9a 47 01 34 05 fc 
0060: 0f 04 04 47 01 88 03 88 03 08 04 47 01 20 02 60 
0070: 02 20 10 31 02 2a 0b 28 22 a0 9a 47 01 34 05 fc 
0080: 0f 04 04 47 01 88 03 f8 03 08 04 47 01 20 02 00 
0090: 03 20 10 38 15 0e 63 00 01 00 82 05 00 47 41 4d 
00a0: 45 00 31 00 47 01 00 02 00 02 08 08 31 01 47 01 
00b0: 08 02 08 02 08 08 38 15 0e 63 00 10 00 82 05 00 
00c0: 43 54 52 4c 00 47 01 20 01 f8 0f 08 08 15 0e 63 
00d0: 00 03 00 82 04 00 4d 50 55 00 31 00 22 00 02 47 
00e0: 01 30 03 30 03 08 02 31 01 22 00 9a 47 01 30 03 
00f0: 60 03 08 02 31 02 47 01 30 03 e0 03 08 02 38 79 
0100: 9a 

++++ dmesg printout follows ++++
Memory: sized by int13 088h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fab50
pcibios_init : BIOS32 Service Directory entry at 0xfafd0
pcibios_init : PCI BIOS revision 2.10 entry at 0xfb000
Probing PCI hardware.
Calibrating delay loop.. ok - 199.48 BogoMIPS
Memory: 62532k/65536k available (1136k kernel code, 384k reserved, 1484k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.36 (root@gondor) (gcc version 2.7.2.3) #2 Sun Feb 21 15:55:27 EST 1999
Starting kswapd v 1.4.2.2 
Real Time Clock Driver v1.09
tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $
tpqic02: DMA buffers: 20 blocks, at address 0x282600 (0x28254c)
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
    ide0: BM-DMA at 0xf000-0xf007
    ide1: BM-DMA at 0xf008-0xf00f
hda: WDC AC14300R, 4112MB w/512kB Cache, CHS=524/255/63
hdb: Maxtor 71670 AP, 1596MB w/128kB Cache, CHS=811/64/63, DMA
hdd: V004H0DT B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
Failed initialization of WD-7000 SCSI card!
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 hda3 hda4
 hdb: hdb1 hdb2 hdb3 hdb4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
CSLIP: code copyright 1989 Regents of the University of Ca
PPP: version 2.2.0 (dynamic channel allocation)
PPP Dynamic channel allocation code copyright 1995 Caldera, Inc.
PPP line discipline registered.
smc-ultra.c: Presently autoprobing (not recommended) for a single card.
smc-ultra.c:v2.02 2/3/98 Donald Becker (http://www.cesdis.gsfc.nasa.gov/~becker)
eth0: SMC Ultra at 0x300, 00 00 C0 56 9B 7B, IRQ 10 memory 0xcc000-0xcffff.
ftape-2.08 960314
 (c) 1993-1995 Bas Laarhoven (http://www.vimec.nl/~bas)
 (c) 1995-1996 Kai Harrekilde-Petersen (http://www.dolphinics.no/~khp)
 (c) 1996-1997 Claus Heine (http://www.momo.math.rwth-aachen.de/~claus)
 QIC-117 driver for QIC-40/80/3010/3020 tape drives
 Compiled for kernel version 2.0.36 with versioned symbols
UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos)
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
tty02 at 0x03e8 (irq = 4) is a 16550A
SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256).
SLIP linefill/keepalive option.
registered device ppp0
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
VFS: Disk change detected on device 02:00
end_request: I/O error, dev 02:00, sector 0
VFS: Disk change detected on device 02:00
ad1848: Interrupt test failed (IRQ5)
ad1848: Interrupt test failed (IRQ5)
ad1848: Interrupt test failed (IRQ5)
++++++++
PCI devices found:
  Bus  0, device   8, function  0:
    VGA compatible controller: Cirrus Logic GD 5430 (rev 71).
      Medium devsel.  IRQ 255.  
      Prefetchable 32 bit memory at 0xe0000000.
  Bus  0, device   7, function  3:
    Bridge: Intel 82371AB PIIX4 ACPI (rev 1).
      Medium devsel.  Fast back-to-back capable.  
  Bus  0, device   7, function  2:
    USB Controller: Intel 82371AB PIIX4 USB (rev 1).
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master Capable.  Latency=32.  
      I/O at 0x6400.
  Bus  0, device   7, function  1:
    IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  Latency=32.  
      I/O at 0xf000.
  Bus  0, device   7, function  0:
    ISA bridge: Intel 82371AB PIIX4 ISA (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  No bursts.  
  Bus  0, device   0, function  0:
    Host bridge: Intel 82439TX (rev 1).
      Medium devsel.  Master Capable.  Latency=32.  
processor	: 0
cpu		: 586
model		: AMD-K5(tm) Processor
vendor_id	: AuthenticAMD
stepping	: 4
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid		: yes
wp		: yes
flags		: fpu vme de pse tsc msr mce cx8 pge
bogomips	: 199.48
++++
 0:    9979100   timer
 1:       3545   keyboard
 2:          0   cascade
 3:    2966366 + serial
 4:       9672 + serial
 8:          3 + rtc
10:      44800   SMC Ultra
13:          1   math error
14:    2039855 + ide0
15:          0 + ide1
++++
2





Why do you want this page removed?